Back to my Clock, Watch and Lathe Courses
WW versions shown, 10.0 mm versions look similar. Left: 3/4" pot chuck, P/N 2100 or 2103, middle: 1" pot chuck P/N 2101 or 2104, right: 1-1/4" pot chuck P/N 2102 or 2105. Each includes a 1/8" pin that is closed on while the collet is turned to size on the lathe.
| P/N | NAME | WT. | PRICE |
| 2100 | 3/4" WW collet pot chuck | .05 lb. | $20.00 |
| 2101 | 1' WW collet pot chuck | .05 lb. | $22.00 |
| 2102 | 1-1/4" WW collet pot chuck | .05 lb. | $25.00 |
| 2104 | 3/4" 10.0 mm collet pot chuck | .15 lb. | $25.00 |
| 2105 | 1" 10.0 mm collet pot chuck | .15 lb. | $27.00 |
| 2106 | 1-1/4" 10.0 mm collet pot chuck | .15 lb. | $29.00 |
These collets can be easily machined and are especially designed to hold larger and odd shaped parts. A 1/8" (3.17mm) dowel pin is included with the collet to close on while the face is being machined. The face is drilled 3/16" deep or less and then bored to exact size to make what is, in effect, a custom chuck for parts too big to be held in regular WW collets. They are used with WW collet adapter and drawbar (P/N 1161).
NOTE: Collet pot chucks are designed to hold material only on the face end, not through the collet. Maximum gripping depth is 3/16" (4.8mm).
Sherline also makes a WW collet with a 1" blank that is deeper than the pot chucks and is not split. It can also be modified to hold tools or parts for special tasks. See P/N 2083.
RETURN TO ACCESSORIES MASTER LIST
Shop for Sherline LATHES
Shop for Sherline MILLING MACHINES
RETURN TO My Home Page
| Home
Page | Frequently
Asked Questions | Testimonials
| Lathes
|
| Mills
| Accessories
|
Tool
Prices | Accessory
Prices |