Learn Watch Repair

Learn Clock Repair

Learn Lathe Lesson 1 (Turning)

Learn Lathe Lesson 2 (Making Jigs & Fictures)

Back to my Clock, Watch and Lathe Courses


WW Collet Adapter, P/N 1161

P/N NAME WT. PRICE
1161 WW Collet adapter and drawbar .5 lb. $35.00

About the WW collet adapter and drawbar...

The collet adapter goes into the #1 Morse taper of the headstock. WW collets are then placed in the adapter and are drawn up tight using the drawbar which passes through the hole in the spindle. The advantage of WW collets is that they have a hole through them for holding long stock. Therefore, the WW collet drawbar is hollow also and threaded inside to grip the external threads of the WW collets. Material up to 3/16" in diameter can pass through the WW collet and drawbar.

A knockout bar is also included to help remove the adapter from the tapered spindle.

This same adapter and drawbar are included in the P/N 1160 5-piece collet set and the deluxe sets P/N 1162 (inch) and P/N1179 (metric).


RETURN TO ACCESSORIES MASTER LIST

Shop for Sherline LATHES

Shop for Sherline MILLING MACHINES

RETURN TO My Home Page


| Home Page | Frequently Asked Questions | Testimonials | Lathes |
| Mills | Accessories | Tool Prices | Accessory Prices |