A four-jaw self-centering chuck is convenient for gripping round or square stock quickly. Shown above is the 2.5" diameter chuck P/N 1075.
This chuck combines the ease-of-use advantages of the 3-jaw chuck with some of the advantages of a 4-jaw chuck. It will automatically center square or round stock. (The stock must be accurately shaped for all four jaws to grip.) It will also grip thin-wall tubing in four places rather than three, which spreads out the load and allows more grip without crushing the tubing.
Turning the knurled portion of the outer diameter of the chuck scrolls all four jaws in unison. Included with the chuck are two Tommy bars for tightening and loosening the chuck.
Centering accuracy on self-centering chucks is to within a few thousandths of an inch. If perfect centering accuracy is required, see the page on 4-jaw chucks.
P/N |
Spindle Thread |
Shipping Wt. |
Price |
1075 |
3/4-16 |
2 |
$130.00 |
VIEW INSTRUCTIONS FOR USING 4-JAW SELF-CENTERING CHUCKS
Lathes can now be purchased packaged with chucks and other preselected groups of accessories. See the page on PACKAGE DEALS. Save time and money by buying a package.
RETURN TO CHUCKS OPENING PAGE
VIEW 3-JAW SELF-CENTERING CHUCKS
VIEW 4-JAW SELF-CENTERING CHUCKS
RETURN TO ACCESSORIES MASTER LIST
Shop for Sherline LATHES
Shop for Sherline MILLING MACHINES
RETURN TO My Home Page
| Home
Page | Frequently
Asked Questions | Testimonials
| Lathes
|
| Mills
| Accessories
|
Tool
Prices | Accessory
Prices |