Back to my Clock, Watch and Lathe Courses
Shown is the P/N 6700 mill kit. Lathe kits include two mounts and a new leadscrew.
P/N | NAME | WT. | PRICE |
6700 | CNC Upgrade Kit, 5000-series Mills | 2.5 lb. | $185.00 |
6705 | CNC Upgrade Kit, 2000-series Mills | 2.5 lb. | $190.00 |
6720 | CNC Upgrade Kit, 4000/4500-series Lathes | 2 lb. | $150.00 |
6730 | CNC Upgrade Kit, 4400-series Lathes | 2 lb. | $160.00 |
6740 | CNC Upgrade Kit, Z-axis only, 5000-series Mills | 1.5 lb. | $72.00 |
6750 | CNC Upgrade Kit, Z-axis only, 2000-series Mills | 1.5 lb. | $75.00 |
6780 | CNC Upgrade Kit, Leadscrew only, 4000/4500-series Lathes | 1 lb. | $100.00 |
6790 | CNC Upgrade Kit, Leadscrew only, 4400-series Lathes | 1 lb. | $110.00 |
About the Sherline CNC Conversion Kits...
Any existing Sherline lathe or mill can be converted to CNC-ready status with the available conversion kits listed above. The installation will involve drilling and tapping several holes to attach the stepper motor mounts. The kits include drill blocks that are attached to the appropriate table or bed using the single existing hole and then two new holes are drilled using the block as a guide. The holes are then tapped and the new mount installed. In the case of the mill column and the lathe leadscrew, a new leadscrew must also be installed. Complete instructions for the conversion are supplied with the kits.
Note that any new Sherline machine can also be ordered from the factory with stepper motor mounts already installed. Go to the Lathes or Mills pages for descriptions and prices.
What does "CNC-ready" mean...
CNC-ready means the machine is ready to bolt on stepper motors and apply CNC control to them by means of a system that the user must supply. If you are not capable of developing your own CNC system, several aftermarket suppliers offer stepper motors, drivers and CNC software to complete the system. See our CNC dealers page for links to aftermarket system suppliers.
RETURN TO ACCESSORIES MASTER LIST
Shop for Sherline LATHES
Shop for Sherline MILLING MACHINES
RETURN TO My Home Page
| Home
Page | Frequently
Asked Questions | Testimonials
| Lathes
|
| Mills
| Accessories
|
Tool
Prices | Accessory
Prices |