Learn Watch Repair

Learn Clock Repair

Learn Lathe Lesson 1 (Turning)

Learn Lathe Lesson 2 (Making Jigs & Fictures)

Back to my Clock, Watch and Lathe Courses


Sherline Mill XY Bases

P/N 5200 (inch), 5210 (metric)--Standard 10" base mill

P/N 5220 (inch), 5225 (metric)--Std. 10" mill w/ adjustable handwheels 

P/N 5401 (inch), 5411 (metric)--Deluxe 12" base mill

P/N 5600 (inch), 5610 (metric)--Model 2000 14" base mill

<

XY bases from the Model 5000/5100 mill (left), the Model 5400 Deluxe mill (middle) and the Model 2000 multi-direction mill (right). P/N 5220 is not shown but would look just like P/N 5200 base with the addition of adjustable "zero" handwheels as shown on the other models.

P/N NAME WT. PRICE
5200 (5210) Mill XY Base (10" base) 19 lb. $230.00
5220 (5225) Mill XY Base (10" base w/ adjustable handwheels) 19 lb. $295.00
5401 (5411) Mill XY Base (Deluxe 12" base) 21 lb. $340.00
5600 (5610) Mill XY Base (Deluxe 14" 2000 base) 22 lb. $370.00

About Mill XY Bases...

If you already own a vertical milling column (P/N 3050/3053, 3480/3485 or 3580/3585) for use with your lathe, but feel a sturdier base with a larger work area would be to your advantage, you may purchase the base of any of our vertical mills as an XY base. Your older vertical milling column can be returned to the factory to be remachined and used with an XY base rather than purchasing the entire vertical milling machine. (Call for price.) Vertical milling columns made after 1995 do not need to be modified. This combination saves you the amount of money included in the cost of the vertical mill for the column, but gives you the same machine less headstock and motor/speed control. XY bases have also found their way into the industrial market and are used in various manufacturing setups. Each of the three mills is available as an XY base. Part numbers for the available bases are as follows:

P/N 5200 (Inch) or 5210 (Metric)—10" XY base from model 5000/5100 mill. Travel: X=9.0" (228 mm), Y=3.0" (76 mm)

P/N 5220 (Inch) or 5225 (Metric)—10" XY base with adjustable "zero" handwheels from model 5500/5510 mill. Travel: same as above

P/N 5401 (Inch) or 5411 (Metric)—12" deluxe XY base with adjustable "zero" handwheels and laser engraved table and base from model 5400/5410 deluxe mill. Travel: X=9.0" (228 mm), Y=5.0" (127 mm)

P/N 5600 (Inch) or 5610 (Metric)—14" deluxe base w/ adjustable "zero" handwheels and laser engraved table and base from the model 2000/2010 8-direction mill. (Takes P/N 3580/3585 column.) Travel: X=9.0" (228 mm), Y=7.0" (178 mm)


RETURN TO ACCESSORIES MASTER LIST

Shop for Sherline LATHES

Shop for Sherline MILLING MACHINES

RETURN TO My Home Page


| Home Page | Frequently Asked Questions | Testimonials | Lathes |
| Mills | Accessories | Tool Prices | Accessory Prices |