Back to my Clock, Watch and Lathe Courses
| P/N | NAME | WT. | PRICE |
| 3559 | 90° Angle Plate | 4 lb. | $90.00 |
This angle plate is a very useful work-holding fixture for milling. It can be used to hold parts on either the vertical or horizontal surface. Parts can also be held from two directions at once. It has large 3" x 3" x 10" surfaces with two T-slots running full length on each. It is made from extruded aluminum with accurately machined faces and a black anodized finish. Provided with the plate are six 10-32 x 3/8" mounting screws and T-nuts.
This fixture is not limited to use on Sherline tools. Like the rotary table and some other Sherline accessories, it could be useful on larger machines in your shop as well.
RETURN TO ACCESSORIES MASTER LIST
Shop for Sherline LATHES
Shop for Sherline MILLING MACHINES
RETURN TO My Home Page
| Home
Page | Frequently
Asked Questions | Testimonials
| Lathes
|
| Mills
| Accessories
|
Tool
Prices | Accessory
Prices |