Learn Watch Repair

Learn Clock Repair

Learn Lathe Lesson 1 (Turning)

Learn Lathe Lesson 2 (Making Jigs & Fictures)

Back to my Clock, Watch and Lathe Courses


Fly Cutter, P/N 3052

P/N NAME WT. PRICE
3052 Fly Cutter .5 lb. $35.00

About the Fly Cutter...

Fly cutters are used primarily on a milling machine for machining large, flat surface areas. The fly cutter is a single-point cutting tool similar to a lathe tool mounted in a special holder. The cutter can be adjusted to cut up to a 2.00" (51 mm) diameter and is easily capable of taking a .010" (.25 mm) deep cut in aluminum at this diameter.

The Sherline fly cutter comes complete with the holder, drawbolt, thrust washer and a left-hand carbide cutting tool. It is a worthwhile addition to any shop.

Sherline also offers an inserted tip fly cutter for those who prefer to work with inserted tip carbide tools. See P/N 7620.


RETURN TO ACCESSORIES MASTER LIST

Shop for Sherline LATHES

Shop for Sherline MILLING MACHINES

RETURN TO My Home Page


| Home Page | Frequently Asked Questions | Testimonials | Lathes |
| Mills | Accessories | Tool Prices | Accessory Prices |