Lathe Tool Height Gage, P/N 3009

P/N NAME WT. PRICE
3009 Lathe Tool Height Gage .5 lb. $18.00

About the Tool Height Gage...

This steel gage offers a simple way to assure the tip of your cutting tool is set to the centerline height of the lathe. The lower lip is for tools in the standard toolpost, while the upper lip is used with the riser toolpost. Just set the gage on the lathe table and position it in front of the tool tip to check height. The tool tip should just touch the bottom of the lip. It is much quicker and easier than checking height against a center in the headstock or tailstock as you don't have to move the crosslide table or tool post to a different position to check tool height.


RETURN TO ACCESSORIES MASTER LIST

Shop for Sherline LATHES

Shop for Sherline MILLING MACHINES

RETURN TO My Home Page


| Home Page | Frequently Asked Questions | Testimonials | Lathes |
| Mills | Accessories | Tool Prices | Accessory Prices |