| P/N | NAME | WT. | PRICE |
| 3001 | 120 VAC Power Feed | 5 lb. | $80.00 |
| 3011 | 240 VAC Power Feed | 5 lb. | $85.00 |
Reducing the diameter of a long shaft or a long part can be a tedious task. Obtaining a good finish on such a part requires very steady movement of the cutting tool; something hard to achieve when feeding the tool by hand. For this reason, Sherline has developed a simple power feed attachment for the lathe. It consists of a constant speed gear motor complete with "ON" and "OFF" switch, a simple, easy-to-install mounting bracket and an engagement mechanism that permits quick disengagement of the motor so that you can hand-feed the cutter whenever you desire. The power feed is from right to left at a constant (nonadjustable) speed of approximately .9" (23mm) per minute.
RETURN TO ACCESSORIES MASTER LIST
Shop for Sherline LATHES
Shop for Sherline MILLING MACHINES
RETURN TO My Home Page
| Home
Page | Frequently
Asked Questions | Testimonials
| Lathes
|
| Mills
| Accessories
|
Tool
Prices | Accessory
Prices |