Back to my Clock, Watch and Lathe Courses
| P/N | NAME | WT. | PRICE |
| 2200 | Radius Cutting Attachment | 1 lb. | $115.00 |
The radius cutting attachment swings a tool through an arc to put a radius on the end of a part. The pivot points and tool position are adjustable, so it is capable of cutting either a concave or convex shape in a large range of sizes.
This tool came about as a result of studying the method used to shape grinding wheels. Conventional thinking says that lathe tools should move parallel to the toolÂ’s longitudinal axis or horizontally across it. Once it was realized that the tool could also be pivoted vertically on this axis, the design of this tool became much easier to conceive. Believe it or not, a technician with a need to cut an accurate radius to make prosthetic eyeballs got us started on putting this tool into production. Now anyone with a need to put a nice looking radius on the end of a part can benefit from the way this accessory makes it easy. It may not be something that a lot of people need, but it is typical of our commitment to serve all of our customers. If you need to (or just think it would be fun to) put a radius onto or into the end of a part, this accessory makes it easy and repeatable. It can also cut a complete ball in a two-step operation covered in the instructions.
The radius cutting tool attaches to the crosslide table and is pivoted up and down instead of moved side-to-side as is traditional for cutting on a lathe. It makes what could otherwise be a difficult task easy.
RETURN TO ACCESSORIES MASTER LIST
Shop for Sherline LATHES
Shop for Sherline MILLING MACHINES
RETURN TO My Home Page
| Home
Page | Frequently
Asked Questions | Testimonials
| Lathes
|
| Mills
| Accessories
|
Tool
Prices | Accessory
Prices |