Learn Watch Repair

Learn Clock Repair

Learn Lathe Lesson 1 (Turning)

Learn Lathe Lesson 2 (Making Jigs & Fictures)

Back to my Clock, Watch and Lathe Courses


Sherline Collet-to-thread Chuck Adapters

Adapters are available to hold Sherline chucks (3/4-16 thread) and Jacobs drill chucks (3/8-24 thread) on non-Sherline lathes. The ends are made to fit watchmaker's lathes that take 8.0 mm or 10.0mm "D" collets. Left to right are P/N 2090, 2091, 2092 and 2093.

P/N NAME WT. PRICE
2090 8.0 mm Collet to 3/4-16 Adapter .5 lb. $30.00
2091 10.0 mm "D" Collet to 3/4-16 Adapter .5 lb. $35.00
2092 8.0 mm collet to 3/8-24 Adapter .5 lb. $25.00
2093 10 mm "D" Collet to 3/8-24 Adapter .5 lb. $30.00

About the 8.0 mm and 10.0 mm collet-to-thread chuck adapters...

These arbors are not designed to be used on Sherline lathes, but rather are specifically suited to the types of lathes often used by jewelers and watchmakers. Though highly accurate, these machines are often not very versatile.

The 3/4"-16 Arbors provide a way to mount a Sherline 3-jaw or 4-jaw chuck to this type of lathe. The 3/8"-24 arbors allow a 1/4" or 3/8" Drill Chuck to be mounted. The ability to mount these chucks adds a great deal of versatility to this type of special purpose tool.


RETURN TO ACCESSORIES MASTER LIST

Shop for Sherline LATHES

Shop for Sherline MILLING MACHINES

RETURN TO My Home Page


| Home Page | Frequently Asked Questions | Testimonials | Lathes |
| Mills | Accessories | Tool Prices | Accessory Prices |