Learn Watch Repair

Learn Clock Repair

Learn Lathe Lesson 1 (Turning)

Learn Lathe Lesson 2 (Making Jigs & Fictures)

Back to my Clock, Watch and Lathe Courses


Adjustable Tailstock Tool Holder, P/N 1203

P/N NAME WT. PRICE
1203 Adjustable Tailstock Tool Holder .5 lb. $40.00

About the adjustable tailstock tool holder...

By making your own custom split collet with a 5/8" outside diameter, this part can hold almost any tool you wish to adapt to it. A set screw tightens on the split collet to hold the tool in place. It is also used to hold the collet adapter, P/N 2085. 

Much like the adjustable live center, holding a tool in perfect alignment in the tailstock without some method of adjusting it can be difficult or impossible. To achieve perfect centering, the tool is mounted to a front plate. The rear plate has the #0 Morse taper that goes in the tailstock spindle. Slightly oversize holes in the rear plate allow the two plates to be adjusted in relationship to each other so that the tool can be brought into perfect alignment with the headstock. This is an economical way to have the accuracy of an adjustable tailstock for those who need it while keeping costs down for those who don't.


RETURN TO ACCESSORIES MASTER LIST

Shop for Sherline LATHES

Shop for Sherline MILLING MACHINES

RETURN TO My Home Page


| Home Page | Frequently Asked Questions | Testimonials | Lathes |
| Mills | Accessories | Tool Prices | Accessory Prices |