Learn Watch Repair

Learn Clock Repair

Learn Lathe Lesson 1 (Turning)

Learn Lathe Lesson 2 (Making Jigs & Fictures)

Back to my Clock, Watch and Lathe Courses


Bullnose Live Center, P/N 1182

P/N NAME WT. PRICE
1182 Bullnose Live Center .75 lb. $75.00

About the bullnose live center...

A live center is the best way to support the end of a long piece held between centers in a lathe, but sometimes the piece may have a hole in the end that is too large in which to index a standard live center. The bullnose live center will support parts or tubing with an open end as large as 1-5/8" diameter. Its solid steel bullnose center turns on two preloaded ball bearings. It is fitted with a #0 Morse taper to fit the tailstock spindle. Rather than turn a sleeve to size down a hole, this special live center can be fitted up in seconds when needed.


RETURN TO ACCESSORIES MASTER LIST

Shop for Sherline LATHES

Shop for Sherline MILLING MACHINES

RETURN TO My Home Page


| Home Page | Frequently Asked Questions | Testimonials | Lathes |
| Mills | Accessories | Tool Prices | Accessory Prices |