SHERLINE Accessories Price List

(Most recent update: 4/19/02)

Back to my Clock, Watch and Lathe Courses

Effective 09/29/03
NOTE: I am NO LONGER SELLING Sherline Products!

To view Sherline Machine Tool and Chuck Prices, click here.

If you don't know the part number of the accessory you are looking for, try the PART NUMBER FINDER. It is organized by machine and section to give you part names, followed by their number.

Shipping Costs will be added to your shipment at time of shipping. If you would like to calculate approx. shipping costs you can use the UPS calculator below. The weight of all products is listed below.

<

Sherline Annotated Accessory Price List

Accessories used with the lathe are shown with the part number in red
Accessories used with the mill are shown with the part number in blue
Accessories that can be used with either the lathe or mill are shown with the part number in black

(After each product name is a brief description of its use.)

PART NO.

PRODUCT NAME AND USE

WT/
LBS

PRICE

1012

SENSITIVE DRILLING ATTACHMENT (Threads onto mill spindle. Spring loaded 5/32" chuck is pulled down by hand using a bearing supported knurled collar. Provides quick action and great "feel" when drilling small holes.) (NEW 11/01)

Click for Picture and MORE INFO

2 $100.00

1074

STEADY REST (Supports the end of long work for center drilling)

Click for Picture and MORE INFO

.75

1090

FOLLOWER REST (Supports thin work, keeps it from deflecting away from the cutter, moves with the lathe saddle to "follow" the work)

Click for Picture and MORE INFO

.75

65.00

1160

WW COLLET SET (Metric P/N 1178) (P/N 1161 included in set) (Collets are like small, individually sized chucks for holding a specific diameter tool or material. WW collets have a hole through the collet and drawbar to accept long material. Traditionally used by watch and clock makers. Sherline WW collets have a .312-.313 body size and .275-40 thread.) Click for Picture and MORE INFO

.5

80.00

116000 WW COLLET BLANK, Large Head .05 10.00
116001 1/64" WW COLLET .05 35.00
116002 1/32" WW COLLET .05 30.00
116003 3/64" WW COLLET .05 20.00
116004 through 116020 WW COLLETS from size 1/16" to 5/16" by 64ths. The part number is given as 1160__ plus the number of 64ths to denote size. For example, 13/64" is P/N 116013 and a 1/4" collet (16/64") is P/N 116016. .05 15.00 ea.

1161

WW COLLET ADAPTER & DRAWBAR (Included in collet set. Adapts WW taper to #1 Morse taper of Headstock) Click for Picture and MORE INFO

.5

35.00

1162

DELUXE WW COLLET SET (Inch) (17 collets, adapter, drawbar, pot chucks, knockout bar, etc. in wooden case) Click for Picture and MORE INFO

3

275.00

1163

8.0 MM COLLET ADAPTER & DRAWBAR (WW collets vary somewhat depending on manufacturer. This adapter holds those with a .314-.315 body size) Click for Picture and MORE INFO

.5

40.00

1164 WW COLLET FIXTURE (Allows WW collets with .312-.313 body to be held on face of rotary table or mill table.) Click for Picture and MORE INFO 1 100.00
1165 8.0 MM COLLET FIXTURE (Allows WW collets with .314-.315 body to be held on face of rotary table or mill table.) Click for Picture and MORE INFO 1 100.00
1171 OAK WW COLLET STORAGE BOX (A high quality storage box that holds up to 96 WW collets. Beveled corners, brass hardware, oak insert with 96 holes, satin lacquer finish.) (NEW 11/01) Click for Picture and MORE INFO 1 30.00
117801 .1 mm WW COLLET .05 35.00
117802 .2 mm WW COLLET .05 35.00
117803 through 117808 WW COLLETS from size .3mm through .8 mm by .1 mm increments. The Part number is given as 11780 plus the collet size in .1 mm. For example, a .6 mm collet would be P/N 117806 .05 30.00 ea.
117809 through 117814 WW COLLETS from size .9mm through 1.4 mm by .1 mm increments. The part number is given as 11780_ or 1178__ plus the collet size in .1 mm. For example, a 1.1 mm collet would be P/N 117811. .05 20.00 ea.
117815 through 117880 WW COLLETS from size 1.5 mm through 8.0 mm by .1 mm increments. The part number is given as 1178__ plus the collet size in .1 mm. For example, a 6.4 mm collet would be P/N 117864. .05 15.00 ea.

1179

DELUXE WW COLLET SET (Metric) (14 collets, pot chucks, etc. in wooden case. P/N 1161 included in set) Click for Picture and MORE INFO

3

245.00

1180

COMPLETE METRIC WW COLLET SET with 78 collets sized from .3 mm to 8.0 mm by .1 mm increments plus a blank collet. The set is contained in a P/N 1171 oak collet box with 96-hole oak insert. (NEW 4/02!) 4 875.00

1182

BULLNOSE LIVE CENTER (Supports tubing or stock with a large end hole when turning between centers. Dual preloaded bearings.)
Click for Picture and MORE INFO

.75

75.00

1185

VERTICAL MILLING TABLE (Metric P/N 1184) (Mounts to lathe or mill table to move work up and down. Has 2.25" of vertical travel) Click for Picture and MORE INFO

2.5

100.00

1187

CHUCK-TO-T-SLOT ADAPTER (Allows 3- or 4-jaw chuck to be quickly screwed to mill table.)
Click for Picture and MORE INFO

.06

5.00

1191

LIVE CENTER (Ball bearings allow center to rotate with part to reduce friction when turning between centers)
Click for Picture and MORE INFO

.25

35.00

1201

ADJUSTABLE LIVE CENTER (Ball bearing live center adjusts for perfect centering of headstock and tailstock)

.5

55.00

1202

ADJUST. TAILSTOCK CHUCK ARBOR (Allows perfect centering of tailstock chuck in relation to headstock)
Click for Picture and MORE INFO

.5

40.00

1203

ADJUST. TAILSTOCK TOOL HOLDER (Allows perfect centering of round tools held in tailstock)
Click for Picture and MORE INFO

.5

40.00

1206

ADJUST. TAILSTOCK 1" DIE HOLDER w/ 13/16" bushing (Allows perfect centering of 1" or 13/16" threading dies)
Click for Picture and MORE INFO

.5

55.00

1220

TAILSTOCK SPINDLE EXTENDER (Designed for lathes built before July, 1996 to extend reach of tailstock spindle over table. Not needed on newer lathes)
Click for Picture and MORE INFO

.5

30.00

1230

#0 MORSE ARBOR TO 3/4-16 CHUCK THREAD ADAPTER (Allows a 3- or 4-jaw chuck to be mounted on the tailstock spindle)
Click for Picture and MORE INFO

.5

30.00

1270

COMPOUND SLIDE (Redesigned, Replaces P/N 1080) (metric P/N 1280) (An alternate and more traditional way of turning tapers)
Click for Picture and MORE INFO

1

100.00

1272

COMPOUND SLIDE RISER BLOCK (Raises compound slide about 1" for use on front side of crosslide with riser blocks in place on lathe) .5 30.00

1290

STEADY REST RISER (Lifts steady rest to match headstock when spacer block is in place. Used mainly by those who leave spacer blocks in place at all times on their lathe.)
Click for Picture and MORE INFO

.25

30.00

1291

SPACER BLOCK KIT (Lifts headstock 1.25" to allow parts up to 6" diameter to be turned. Includes extended riser rocker tool post)
Click for Picture and MORE INFO

1.5

65.00

1292

TAILSTOCK RISER BLOCK (Lifts tailstock 1.25" for turning between centers with headstock riser block in place)
Click for Picture and MORE INFO

1

45.00

1296

CUTOFF TOOL HOLDER RISER BLOCK (Lifts cutoff tool P/N 3002 for use with riser blocks in place. Used with tool upside down on back side of crosslide table.) .5 45.00

1297

MILL HEADSTOCK SPACER BLOCK (Same as riser block for lathe, but without tool post. Adds 1.25" of throat distance when milling)
Click for Picture and MORE INFO

.75

40.00

1300

MILL COLUMN SPACER BLOCK (Raises column base 2" for greater Z-axis clearance. Includes longer bolts for mounting.) (Newly listed 3/02) 1.50 30.00

2045

HEX AND OCTAGON INDEX BLOCK SET (Fits in mill vise to allow simple indexing of 2, 3, 4, 6 or 8 sides or hole patterns)
Click for Picture and MORE INFO

2

50.00

2049

SPINDLE HANDWHEEL (Used to rotate the headstock spindle much like the large handwheel on a sewing machine is used)
Click for Picture and MORE INFO

1.5

40.00

2083

WW COLLET 1" BLANK (Make your own custom tool holder or collet that is held with the WW adapter and drawbar)
Click for Picture and MORE INFO

.06

25.00

2085

WW COLLET TAILSTOCK ADAPTER (Use with P/N 1203) (Allows WW collets to be held in the tailstock)
Click for Picture and MORE INFO

.25

50.00

2086

8mm COLLET TAILSTOCK ADAPTER (Use with P/N 1203)

.25

50.00

2090

8.0mm COLLET TO 3/4-16 THREAD (For mounting Sherline chuck on watchmaker's or jeweler's lathe that takes 8.0mm collets)
Click for Picture and MORE INFO

.5

30.00

2091

10mm "D" COLLET TO 3/4-16 THREAD (For mounting Sherline chuck on watchmaker's or jeweler's lathe that takes 10mm D collets)

.5

35.00

2092

8.0mm COLLET TO 3/8-24 THREAD (For mounting chuck with 3/8-24 thread on watchmaker's or jeweler's lathe that takes 8.0mm collets)

.5

25.00

2093

10.0mm COLLET TO 3/8-24 THREAD (For mounting chuck with 3/8-24 thread on watchmaker's or jeweler's lathe that takes 10mm D collets)

.5

30.00

2094

CLOCKMAKER'S GEAR CUTTING ARBOR, 7.0mm to Morse #1 (Arbor for use on watchmaker or jeweler's lathes to hold round gear cutter. Not for use on Sherline lathe)
Click for Picture and MORE INFO

.5

40.00

2095

CLOCKMAKER'S GEAR CUTTING ARBOR, 7.0mm to 10mm "D" Collet (Arbor for use on watchmaker's or jeweler's lathes to hold round gear cutter. Not for use on Sherline lathe)

.5

45.00

2096

CLOCKMAKER'S GEAR CUTTING ARBOR, 7.0mm to 8.0 mm WW Collet (Arbor for use on watchmaker's or jeweler's lathes to hold round gear cutter. Not for use on Sherline lathe)

.5

40.00

2100

3/4" COLLET POT CHUCK (Collet pot chucks are like small chucks custom turned to hold a particular part. The part is held in a depression turned in the surface of the pot chuck and does not go all the way through. Includes dowel pin to clamp on while turning to size.)
Click for Picture and MORE INFO

.06

20.00

2101

1" COLLET POT CHUCK (See 2100)

.06

22.00

2102

1-1/4" COLLET POT CHUCK (See 2100)

.06

25.00

2103

10mm 3/4" COLLET POT CHUCK (See 2100)

.12

25.00

2104

1Omm 1" COLLET POT CHUCK (See 2100)

.12

27.00

2105

10mm 1-1/4" COLLET POT CHUCK (See 2100)

.12

29.00

2106

LIVE CENTER-TO-8mm COLLET (A live center for watchmaker's or jeweler's lathes.)
Click for Picture and MORE INFO

.25

50.00

2107

LIVE CENTER-TO-10mm COLLET (A live center for watchmaker's or jeweler's lathes.)

.25

50.00

2110

W.R. SMITH WATCHMAKER'S T-REST (Used on Sherline lathes to support a hand-held "graver", a traditional watchmaker's tool. Turns Sherline lathe into a first class watch or clock maker's lathe. Designed by famed craftsman W.R. Smith. Graver-making instructions included.)
Click for Picture and MORE INFO

1

175.00

2200

RADIUS CUTTING ATTACHMENT (For cutting ball ends, convex and concave radii on ends of parts and even complete balls)
Click for Picture and MORE INFO

1

115.00

2250

QUICK CHANGE TOOL POST w/ 3 holders (Saves time when changing tools. Holders included for 1/4" cutter, round boring tool and cutoff tool. Cutting tools not included.)
Click for Picture and MORE INFO

3

250.00

2251

QUICK CHANGE TOOL POST RISER (Brings quick-change tool post up to proper centerline height when using a riser block under the headstock for cutting larger diameters.)
Click for Picture and MORE INFO

1.75

50.00

2256

RIGHT-HAND 35° CARBIDE INSERT TOOL HOLDER (Includes one 55° insert) (Use in 7600 tool post. Carbide is used to cut hard-to-machine materials like stainless steel)
Click for Picture and MORE INFO

.25

40.00

2257

LEFT-HAND 35° CARBIDE INSERT TOOL HOLDER (Includes one 55° insert) (Use in 7600 tool post. Carbide is used to cut hard-to-machine materials like stainless steel)

.25

40.00

2258

PAIR OF RIGHT- and LEFT-HAND 35° INSERT TOOL HOLDERS (Includes one 55° insert per holder) (Replacement inserts, P/N 7605) (Save $20 by buying both LH and RH tools together)

.5

60.00

2280

1/4" QUICK-CHANGE TOOL BIT HOLDER (Incl. w/ 2250)
Click for Picture and MORE INFO

1

50.00

2285

3/8" QUICK-CHANGE BORING TOOL HOLDER (Incl. w/ 2250)
Click for Picture and MORE INFO

1

50.00

2290

QUICK-CHANGE CUTOFF TOOL HOLDER (Incl. w/ 2250)
Click for Picture and MORE INFO

1

75.00

2295

CARBIDE INSERT HOLDER for QUICK-CHANGE TOOL POST
Click for Picture and MORE INFO

1

85.00

3001

POWER FEED (120V.) (for 240V. see P/N 3011) (Single direction motor drives lathe leadscrew .9" per minute to provide smooth final cut on long parts. Not designed for use with thread cutting attachment.)
Click for Picture and MORE INFO

5

80.00

3002

CUTOFF TOOL & HOLDER (for cutting off work piece from the raw stock from which it was turned. Often called a "parting tool".)
Click for Picture and MORE INFO

.25

45.00

3003

TWO-POSITION TOOL POST (Holds two 1/4" cutting tools for quicker tool changes)
Click for Picture and MORE INFO

.25

15.00

3004

KNURLING TOOL HOLDER (Makes knurled finishes. Includes one set of spiral knurls. Other sizes and patterns available)
Click for Picture and MORE INFO

.25

60.00

3005

1/4" SQ. HIGH SPEED STEEL TOOL BLANK (Sharpen yourself on a bench grinder for standard or custom-shaped tools)
Click for Picture and MORE INFO

.06

3.00

3006

CARBIDE TOOL SET (3 PC) (LH, RH, 60° THREADING) (Carbide tips are brazed to 1/4" tool shanks. For cutting hard materials)
Click for Picture and MORE INFO

.38

18.00

3007

HIGH SPEED STEEL TOOL SET (3 PC) (LH, RH, BORING) (Pre-sharpened to save you time. For cutting most materials)
Click for Picture and MORE INFO

.12

25.00

3008

TWO-POSITION TOOL POST, 5/16" - 3/8" (Holds 5/16" tool on one side, 3/8" on other side. Allows use of tools other than 1/4")
Click for Picture and MORE INFO

.25

25.00

3009

CUTTING TOOL HEIGHT GAUGE (Used to assure tool tip on resharpened tools is set to proper centerline height. Works with both regular or riser toolpost)
Click for Picture and MORE INFO

.25

18.00

3011

POWER FEED (240V.) (See P/N 3001)

5

85.00

3012

HOLD-DOWN SET (Simple strap clamp set for clamping parts to table for milling. Includes 2 clamps, T-nuts and assorted length bolts)
Click for Picture and MORE INFO

.38

20.00

3013

STEP BLOCK HOLD-DOWN SET (This is a smaller version of the sets used on most full-size mills. Quicker to use than 3012 and holds larger parts. Stepped blocks interlock to adjust height quickly. Spare block included to be cut to custom sizes)
Click for Picture and MORE INFO

1

30.00

3015

TOGGLE SWITCH DUST SEAL (Use to keep fine dust out of speed contorl on/off switch when cutting brass or wood)
Click for Picture and MORE INFO

.06

8.00

3016

CUTOFF TOOL REAR MOUNTING BLOCK (Allows 3002 cutoff tool to be mounted on "back" side of crosslide where it is out of the way and can be left in place for easy parting off. Cutoff blade mounts upside down for use in this position)
Click for Picture and MORE INFO

.12

15.00

3017

CROSSLIDE ACCESSORY PLATE (Strengthens and protects lathe table when used for milling with vertical milling column. Not for use during lathe operations as tool post height will be incorrect.)
Click for Picture and MORE INFO

1

30.00

3018

REAR MOUNT CUTOFF TOOL AND HOLDER
Click for Picture and MORE INFO

.25

45.00

3020

SHERLINE "T" DRIVER (5/32" hex driver with T-handle adjusts majority of 10-32 screws on Sherline tool. Easy to find on your bench.)
Click for Picture and MORE INFO

.12

5.50

3021

CENTER DRILL SET (3 PC., #1, #2, #3 double-ended) (Center drills don't wander off center when starting holes. 60° tip makes proper hole to match dead or live center tips for turning between centers)
Click for Picture and MORE INFO

.06

15.00

3035

SPUR DRIVER (A quick way to drive wood parts when turning between centers.)
Click for Picture and MORE INFO

.25

20.00

3038

WOOD TOOL REST (3" & 5" REST) (Supports hand-held wood cutting tools for wood turning)
Click for Picture and MORE INFO

.75

50.00

3040

1/8" ARMATURE SUPPORT (Designed to hold 1/8" motor shafts for truing up copper armatures for highest performance. Often used for working on slot car motors)

.25

30.00

3047

EXTENDED WOOD TOOL REST SET (For use w/ 1291) (Like 3038 only with longer shafts to match height of headstock with riser block in place)
Click for Picture and MORE INFO

.25

55.00

3050

VERTICAL MILLING COLUMN (Metric P/N 3053) (Converts your lathe into a 3-axis mill in less than 30 seconds.)
Click for Picture and MORE INFO

8

130.00

3052

FLY CUTTER (For quickly milling large, flat surfaces.)
Click for Picture and MORE INFO

.5

35.00

3054

BORING HEAD (For enlarging holes to a precise inside diameter, uses 3/8" round boring tools)
Click for Picture and MORE INFO

.5

60.00

3055

MORSE #1 BLANK (Turn on lathe and/or mill slots to make your own custom fly cutter, slitting saw holder or special tool holder)
Click for Picture and MORE INFO

.5

15.00

3056

T-NUTS, 10/32 (Set of 10)
Click for Picture and MORE INFO

.06

7.50

3057

ROCKER TOOL POST (Rocking insert with two screws allows adjustment of tool tip height for accurate turning. Eliminates shimming. Included on Model 4400/4410 lathes)

.25

30.00

3058

4-JAW HOLD DOWN SET (Two angle clamps with T-nuts to clamp 4-jaw vise to any position on mill table. Included with 3551 mill vise)
Click for Picture and MORE INFO

.12

5.00

3059

SLOW SPEED ATTACHMENT (For use on older lathes with AC/DC motor to provide more torque at low speeds. Not used on lathes with newer DC motor.)

.25

30.00

3060

MILLING COLLET SET (3 PC), (Metric P/N 3090) (1/8", 3/16", 1/4") (Milling collets have a #1 Morse taper and are pulled into the headstock with a drawbolt. They do not have a through hole like WW collets. They are used to hold specific size end mills or cutters.)
Click for Picture and MORE INFO

.12

40.00

3061

BORING TOOL—Max. Depth .600, Min. Hole 1/4") (Use w/ P/N 3054 boring head)
Click for Picture and MORE INFO

.12

15.00

3063

BORING TOOL—Max. Depth 1", Min. Hole 5/16" (Use with P/N 3054 boring head)

.12

15.00

3064

BORING TOOL—Max. Depth 1.5", Min. Hole 5/16" (Use w/ 3054 boring head)

.12

18.00

3065

SLITTING SAW HOLDER (Holds small, round sawblades for cutting thin slots)
Click for Picture and MORE INFO

.25

35.00

3072

1/4" DRILL CHUCK & DRAWBOLT (Jacobs chuck includes key, Included on 4000A lathes and 5400/2000-series mills)

.5

40.00

3073

3/8" DRILL CHUCK & DRAWBOLT (Jacobs chuck includes key, included on 4400A lathes)

.75

50.00

3075

5/16" END MILL HOLDER

.5

30.00

3076

6.0mm END MILL HOLDER

.5

30.00

3077

8.0mm END MILL HOLDER

.5

30.00

3078

10.0MM END MILL HOLDER (Most common size metric tool holder)

.5

30.00

3079

3/8" END MILL HOLDER (Most common size inch tool holder. 3/8" end mills are available from many sources and are, therefore, the least expensive and available in the largest selection.)
Click for Picture and MORE INFO

.5

30.00

6079

1/4" END MILL HOLDER (Holds end mills in 3080 set)

.5

30.00

6080

3/16" END MILL HOLDER

.5

30.00

6081

1/8" END MILL HOLDER

.5

30.00

3080

END MILL SET (1/4" SHK) (1/8", 3/16", 1/4")
Click for Picture and MORE INFO

.06

30.00

3087

3/32" MILL COLLET
Click for Picture and MORE INFO

.06

15.00

3089

5/32" MILL COLLET

.06

15.00

3091

7/32" MILL COLLET

.06

15.00

3092

3.0MM MILL COLLET

.06

15.00

3093

4.0MM MILL COLLET

.06

15.00

3094

6.0MM MILL COLLET

.06

15.00

3095

1/8" MILL COLLET

.06

15.00

3096

3/16" MILL COLLET

.06

15.00

3097

1/4" MILL COLLET

.06

15.00

3098

MILL COLLET (Special Order .125 to .312) (Allow 3 weeks delivery)

.06

25.00

3100

THREAD-CUTTING ATTACHMENT (Being able to cut threads on your lathe frees you from the expense of purchasing a lot of expensive taps and dies for non-standard size threads. Cut just about any thread, inch or metric, using this set of change gears. Hand crank wheel included)
Click for Picture and MORE INFO

3

110.00

3200

INDEXING ATTACHMENT (Indexes in 5° increments, uses rack gear to turn rotation into measurable linear movement for divisions other than 5° multiples. Includes base and tailstock.)
Click for Picture and MORE INFO

8

165.00

3217

GEAR TOOTH CUTTER HOLDER & HSS BLANK (Grind gear shape into tool blank and use on mill in conjunction with indexing attachment or rotary table to cut your own gears.)
Click for Picture and MORE INFO

.5

35.00

3230

MILL ARBOR-7/8" DIA. (Short) (Holds round mill cutters)
Click for Picture and MORE INFO

.5

50.00

3231

MILL ARBOR-7/8" DIA. (Long) (Holds round mill cutters)

.5

50.00

3235

MILL ARBOR-1" DIA. (Short) (Holds round mill cutters)

.5

50.00

3236

MILL ARBOR-1" DIA. (Long) (Holds round mill cutters)

.5

50.00

33070

10,000 RPM HEADSTOCK, DC MOTOR AND SPEED CONTROL UNIT (Complete, self-contained drive unit with pulleys designed to turn the spindle at speeds up to 10,000 RPM. Alternate pulley position provides more torque and a maximum spindle speed of 2200 RPM. Operates on any current 100VAC to 240VAC, 50 or 60 Hz.) (NEW 11/01) 10 335.00

3400

OVERSIZE HANDWHEEL (2.5" diameter for easier cranking)
Click for Picture and MORE INFO

.12

15.00

3420

2" ADJUSTABLE ZERO HANDWHEEL (Mill Y-axis or lathe crosslide) (Metric P/N 3430)
Click for Picture and MORE INFO

.25

35.00

3440

2.5" ADJUSTABLE ZERO HANDWHEEL (Mill Y-axis or lathe leadscrew) (Metric P/N 3450)
Click for Picture and MORE INFO

.25

40.00

3460

2.5" ADJUSTABLE ZERO HANDWHEEL (W/Thrust & Bearing Set for Mill Z-axis) (Metric P/N 3465)

.25

45.00

3480

VERTICAL MILLING COLUMN W/ADJ. HANDWHEEL (Metric P/N 3485) (Turns lathe into a mill in less than 30 seconds. Normally used with 4500 or 4400 lathes to match adj. Zero handwheels)

8

150.00

3500

ROTARY COLUMN ATTACHMENT (Allows mill column to be swung up to 90° to either side for angled drilling)
Click for Picture and MORE INFO

1.75

75.00

3551

MILLING VISE (Holds work for milling. Looks similar to a drill press vise, but jaw pulls down and in to keep parts from lifting during milling. Precise jaws and body can be squared up with table.)
Click for Picture and MORE INFO

2.5

65.00

3559

90° ANGLE PLATE (Mounts parts 90° to table for milling)
Click for Picture and MORE INFO

4

90.00

3560

MILL TOOLING PLATE (Protects mill table, pre-drilled hole pattern makes it easy to clamp parts, mount mill vise or rotary table to mill.)
Click for Picture and MORE INFO

2.5

45.00

3570

ROTATING MILL VISE BASE (Holds mill vise while allowing it to be rotated 360° using laser engraved scale for angle reference)
Click for Picture and MORE INFO

1

90.00

3575

ROTATING MILL VISE BASE AND MILL VISE (P/N 3551) (Save by buying vise and base at same time)
Click for Picture and MORE INFO

2.5

145.00

3580

MULTI-DIRECTION DELUXE VERTICAL MILLING COLUMN (Turns your lathe into an 8-direction mill in 30 seconds)

13

350.00

3585

MULTI-DIRECTION DELUXE VERT. MILLING COLUMN (Metric)

13

350.00

3700

4" PRECISION ROTARY TABLE (72:1 worm gear divides a circle into 3600 parts without interpolation. Used for indexing radial hole patterns or milling radii or indexed flats. Used on 3701 or 3750 to index for cutting gear teeth. A mill with a rotary table is an extremely potent combination, make virtually any part possible, with size being the only limitation)
Click for Picture and MORE INFO

8

250.00

3700-CNC

4" PRECISION ROTARY TABLE, CNC-READY (Includes stepper motor mount ready for application of your own stepper motor and CNC controls. Handwheel also included)

11

300.00

3701

RIGHT ANGLE ATTACHMENT (For use with P/N 3700) (Mounts rotary table perpendicular to mill table)
Click for Picture and MORE INFO

3

55.00

3702

RIGHT ANGLE ADJUSTABLE TAILSTOCK (For use with P/N 3700) (Aligns with center of rotary table when mounted on 3701. Supports arbor shaft used to hold gear blanks when cutting teeth)
Click for Picture and MORE INFO

2

55.00

37091

12 mm to 3/8-16 ADAPTER (Allows Chuck with 12 mm thread to be mounted to Sherline rotary table P/N 3700) NEW 10/01 .25 10.00

37092

14 mm to 3/8-16 ADAPTER (Allows Chuck with 14mm thread to be mounted to Sherline rotary table P/N 3700) NEW 10/01 .25 10.00

3750

TILTING ANGLE TABLE (Mount part, mill vise, chucks or rotary table to mill any angle from 0° to 90°. In 90° position, holds rotary table at same height as 3701, eliminating the need for that part)
Click for Picture and MORE INFO

2.5

100.00

4017U

MILL SADDLE LOCKING LEVER UPGRADE (Allows Z-axis leadscrew to be locked with a lever on the leadscrew instead of tightening a screw with a hex wrench. Standard on all mills after 1998) (Metric P/N 4117U)
Click for Picture and MORE INFO

.5

25.00

4150

15" LATHE VINYL COVER (Protect your 4000-series lathe from dust and grit)
Click for Picture and MORE INFO

.25

10.00

4151

24" LATHE VINYL DUST COVER (Protect your 4400-series lathe from dust and grit)

.25

12.00

4335

10,000 RPM PULLEY CONVERSION (High speed position allows motor to turn spindle at a maximum of 10,000 RPM. Second belt position provides more torque and a maximum of 2200 RPM. New 2-piece standoff replaces standard motor standoffs. Installs in about 10 minutes.
Click for Picture and MORE INFO
1 75.00

4360

CHIP GUARD (Clear shield contains flying chips. Pivots out of the way when not needed. Not a substitute for safety glasses)
Click for Picture and MORE INFO

.5

14.00

5150

MILL VINYL COVER (Protects your 5000-series and 5400-series mill from dust and grit)
Click for Picture and MORE INFO

.25

12.00

5151

MILL VINYL COVER (Protects your 2000-series mill from dust and grit)

.25

15.00

5200

XY BASE (10") (Inch) (Add a 3050 vertical milling column and the motor/speed control from your lathe and you have a model 5000 mill)
Click for Picture and MORE INFO

17

230.00

5201

XYZ BASE (10") (Inch) (Add the motor/speed control from your lathe and you have a model 5000 mill)
Click for Picture and MORE INFO

23

315.00

5210

XY BASE (10") (Metric) (Add a 3053 vertical milling column and the motor/speed control from your lathe and you have a model 5100 mill)

17

230.00

5211

XYZ BASE (10") (Metric) (Add the motor/speed control from you lathe and you have a model 5100 mill)

23

315.00

5220

XY BASE (10") W/ ADJUST. HANDWHEELS (Metric P/N 5225) (Add a vertical milling column with adjustable handwheels and the motor/speed control from your lathe and you have a complete model 5500/5510 mill)

17

295.00

5230

XYZ BASE (10" W/ ADJUST. HANDWHEELS (Metric P/N 5235) (Add the motor/speed control from your lathe and you have a complete model 5500/5510 mill)

23

410.00

5300

HOME MACHINIST'S HANDBOOK by Doug Briney (275 pages, B/W, uses Sherline tools in all the setup examples, project plans included)

2

20.00

5301

TABLETOP MACHINING by Joe Martin (The ultimate miniature machining book by Sherline's owner. All color, 8-1/2 x 11, 400+ photos, 200+ illustrations. Third printing, 11/01 includes 8 more pages and several new photos.)

3.5

40.00

20.00

5325

SHERLINE TOOLS & ACCESSORIES CATALOG, 6th Edition (48-page color catalog shows tools and accessories plus tells briefly how each is used. Current price lists enclosed.)
Click for Picture and MORE INFO

.5

2.00

5326

SHERLINE ASSEMBLY AND INSTRUCTION GUIDE, 4th Edition (44-page color instruction book included with new machines. A good basic course in machining)
Click for Picture and MORE INFO

.5

2.00

5327

SHERLINE SHOP GUIDE (144 pages, B/W, 8.5 x 11" perfect bound book incorporates illustrated instructions from all of Sherline's major accessories into one volume.)
Click for Picture and MORE INFO

3

10.00

5328

STEAM ENGINE VIDEO by Rudy Kouhoupt (VHS, 3 Hrs., includes materials list and printed plans for a steam engine. Video takes you through every setup from start to finish.)

2

60.00

5329

SHOP SECRETS—USING MEASURING TOOLS by Mike Rehmus (VHS, 2 hrs., tells you how each measuring tool used in machining is used and cared for. Very professionally produced. Includes promo for NAMES show too)

1

39.95

5330

SAFETY GLASSES (A MUST in every shop. Get them from us or get them from someone else, but don't cut metal without them! These are good quality and comfortable.)
Click for Picture and MORE INFO

.25

7.00

5401

DELUXE XY BASE w/ 12" Base and Adjustable Handwheels (Metric P/N 5411) (Add a 3480 vertical milling column and the motor/speed control from your lathe and you have a complete deluxe model 5400 mill.)

19

340.00

5420

DELUXE XYZ BASE w/ 12" Base and Adjustable Handwheels (Metric P/N 5430) (Add the motor/speed control from your lathe and you have a complete deluxe model 5400 mill.)

25

445.00

5600

Model 2000 8-DIRECTION MILL XY BASE (metric P/N 5610) (Add a multi-direction vertical milling column and the motor/speed control from your lathe and you have a complete model 2000 mill.)

13

360.00

5625

Model 2000 8-DIRECTION MILL XYZ BASE (metric P/N 5630) (Add the motor/speed control from your lathe and you have a complete model 2000 mill.)

24

655.00

5650

8-DIRECTION UPGRADE for all existing SHERLINE MILLS (metric P/N 5660) (A multi-direction milling column and an offset base brings your existing mill up to the capabilities of a model 2000 mill.)
Click for Picture and MORE INFO

9

250.00

5680

8-DIRECTION UPGRADE for LATHE VERTICAL MILLING COLUMN (metric P/N 5685) (Turns your lathe/vertical milling column combination into an 8-direction mill.)

9

250.00

6079

1/4" END MILL HOLDER

.5

30.00

6080

3/16" END MILL HOLDER

.5

30.00

6100

HORIZONTAL MILLING CONVERSION
Click for Picture and MORE INFO

11

120.00

6101

COLUMN CONVERSION (To optimize the horizontal conversion, P/N 6100, the mill column should be reworked to allow for the best set up. Contact SHERLINE for information.)
Click for Picture and MORE INFO

8

(CALL)

6700

CNC UPGRADE KIT, 5000 OR 5400 MILL (Metric P/N 6710) (Replaces the handwheels with stepper motor mounts, ready for the installation of your own stepper motors and CNC control.)
Click for Picture and MORE INFO

2.5

185.00

6705

CNC UPGRADE KIT, 2000 MILL (Metric P/N 6715) (Replaces the handwheels with stepper motor mounts, ready for the installation of your own stepper motors and CNC control.)

2.5

190.00

67127

STEPPER MOTOR, 2 amp, #23 Frame, dual shaft, 100+ oz-in stall torque, pre-wired with plug for use with Sherline rotary or linear controller, flats pre-machined for Sherline coupler and handwheel set screws.
Click for Picture and MORE INFO

.5

70.00

67129

STEPPER MOTOR, 2 amp, #23 Frame, dual shaft, 100+ oz-in stall torque, with raw six-wire lead, no flats on motor shafts (For use on non-Sherline mounts.)

.5

48.00

67130

STEPPER MOTOR, 2-amp, #23 Frame, dual shaft, 100+ oz-in stall torque, with raw six-wire lead, flats pre-machined onto motor shaft (For use with Sherline motor mount, coupler and handwheel.)

.5

53.00

6720

CNC UPGRADE KIT, 4000 or 4500 LATHE (Metric P/N 6725) (Replaces the handwheels with stepper motor mounts, ready for the installation of your own stepper motors and CNC control.)

2

150.0

6730

CNC UPGRADE KIT, 4400 LATHE (Metric P/N 6735) (Replaces the handwheels with stepper motor mounts, ready for the installation of your own stepper motors and CNC control.)

2

160.00

6740 CNC UPGRADE KIT, 5000 and 5400 Series Mills, Z-axis only (Metric P/N 6745) 1 72.00
6750 CNC UPGRADE KIT, 2000 Series Mills, Z-axis only (Metric P/N 6755) 1 75.00

6780

CNC UPGRADE KIT, leadscrew axis only, 4000/4500-series lathes (Metric P/N 6785

1

100.00

6790

CNC UPGRADE KIT, leadscrew axis only, 4400-series lathes (Metric P/N 6795)

1

110.00

7505

SET OF MACHINIST'S PARALLELS (Sets of two parallel bars in five different sizes sized for miniature machine tools. Used to support work a known distance above and parallel to the table.)
Click for Picture and MORE INFO

.25

25.00

7600

3/8" INSERT HOLDER TOOL POST (Has side slot to hold 3/8" shank cutting tool holders plus a 3/8" round hole to hold round boring bars.)
Click for Picture and MORE INFO

.25

20.00

7610

55° NEGATIVE RAKE INSERT HOLDER w/ insert (Holds carbide tips for cutting hard materials like stainless steel. 5° angle provides negative clearance for the cutter, which is supported all the way down to the table for rigidity.)
Click for Picture and MORE INFO

.5

60.00

7612

REPLACEMENT 4-SIDED CARBIDE INSERT TOOL (for 7610)
Click for Picture and MORE INFO

.06

13.00

7620

SINGLE FLUTE INSERT FLY CUTTER (Carbide insert cuts hard materials. Also is a good compromise between a fly cutter and an end mill, because it will cut a 1-1/8" wide path while still being able to cut right up to a shoulder.)
Click for Picture and MORE INFO

.5

55.00

7622

REPLACEMENT 2-SIDED CARBIDE TIP (for 7620)

.06

12.00

8100

3-AXIS DIGITAL READOUT w/ RPM GAGE FOR MILL (inch) (Metric P/N 8160) (Reads table position to .0005", electronic compensation for backlash)
Click for Picture and MORE INFO

3

350.00

8200

2-AXIS DIGITAL READOUT w/ RPM GAGE FOR LATHE (inch) (Metric P/N 8260) (Reads table position to .0005", electronic compensation for backlash)

3

300.00

8210

3-AXIS DIGITAL READOUT w/ RPM GAGE FOR LATHE and VERTICAL MILLING COLUMN (Inch) (Metric P/N 8215) (Reads table position to .0005", electronic compensation for backlash)

3

360.00

8220

2-AXIS DIGITAL READOUT w/ RPM GAGE FOR LATHE without READOUT BOX (For those who already have a Mill DRO package) (Inch) (Metric P/N 8225) (Reads table position to .0005", electronic compensation for backlash)

3

150.00

8240

Z-AXIS VERTICAL MILLING COLUMN DIGITAL READOUT HANDWHEEL PACKAGE (Inch) (Metric P/N 8245) (Adds third readout for those who bought 2-axis DRO and later add a vertical milling column.)

.5

60.00

8700

CNC ROTARY INDEXER w/ CONTROLLER, STEPPER MOTOR, MOUNT, POWER SUPPLY, CABLES, 4" ROTARY TABLE AND HOLD-DOWNS (Inch) (Stand-alone system with its own built-in computer is user programmable. A computer controlled stepper motor indexes the rotary table to within ±.006°. Can be daisy-chained with linear controller to do gear cutting.)
Click for Picture and MORE INFO

12

675.00

8800

CNC LINEAR CONTROLLER w/ STEPPER MOTOR (Inch) (Stepper motor bolts onto Sherline CNC-ready stepper motor mounts. Controller drives stepper motor to move any axis on lathe or mill. From .0005" to 9.9995". Will work on any lathe or mill axis that already has a stepper motor mount installed. Includes power supply and cable. Can be daisy chained with other Sherline linear or rotary controllers.)
Click for Picture and MORE INFO

5

450.0

8850

CNC MILL OR LATHE POWER FEED (MILL X- or Y-AXIS or LATHE CROSSLIDE) w/ STEPPER MOTOR, MOUNT, COUPLER, CONTROLLER, CABLES AND POWER SUPPLY (Replaces handwheel on X- or Y-axis of mill  or lathe crosslide with stepper motor mount and stepper motor. Motor is driven by self-contained computer/keypad unit and power supply to allow movement from .0005" to 9.9995". Includes drill block for locating mounting holes. Can be daisy chained with other Sherline controllers) Inch version only
Click for Picture and MORE INFO

6

495.00

8860

CNC MILL POWER FEED (Z-AXIS, 5000/5400 MILLS) w/ STEPPER MOTOR, MOUNT, COUPLER, CONTROLLER, CABLES, POWER SUPPLY AND REPLACEMENT Z-AXIS LEADSCREW (Replaces handwheel on Z-axis of mill with stepper motor mount and stepper motor. Motor is driven by self-contained computer/keypad unit and power supply to move Z-axis in programmable .0005" increments up to full length of travel. Includes drill block for locating mounting holes. Can be daisy chained with other Sherline linear or rotary controllers.) Inch version only 7 507.00

8865

CNC MILL POWER FEED (Z-AXIS, 2000 MILL) w/ STEPPER MOTOR, MOUNT, COUPLER, CONTROLLER, CABLES, POWER SUPPLY AND REPLACEMENT Z-AXIS LEADSCREW (See description for 8860 above) 7 507.00

8870

CNC LATHE LEADSCREW POWER FEED, 4000/4500 LATHES, w/ STEPPER MOTOR, MOUNT, COUPLER, CONTROLLER, CABLES, POWER SUPPLY AND REPLACEMENT 15" LEADSCREW (Replaces handwheel on long leadscrew of lathe with stepper motor mount and stepper motor. Motor is driven by self-contained computer/keypad unit and power supply to move the saddle from .0005 to 9.9995". Includes drill block for locating mounting holes. Can be daisy chained with other Sherline linear or rotary controllers.) Inch version only 7 515.00

8880

CNC LATHE LEADSCREW POWER FEED, 4400 LATHES, w/ STEPPER MOTOR, MOUNT, COUPLER, CONTROLLER, CABLES, POWER SUPPLY AND REPLACEMENT 24" LEADSCREW  (See description for 8870 above.) 7 520.00

RETURN TO ACCESSORIES MASTER LIST

Shop for Sherline LATHES

Shop for Sherline MILLING MACHINES

RETURN TO My Home Page


| Home Page | Frequently Asked Questions | Testimonials | Lathes |
| Mills | Accessories | Tool Prices | Accessory Prices |